How to Apply ?

Surface Preparation

Ensure the surface is clean, dry, and free of dust, grease, or contaminants.
Sand flooring to 80/120 grit and furniture, counters, stairs, vertical surfaces to 180/220 grit. Vacuum thoroughly and wipe with a microfiber cloth.

Mixing

Natura Onecoat 2K Oil is a two-component system. Stir Component A (Oil) well, then mix with Component B (Hardener) at a ratio of 3:1 by volume.
Mix until fully homogeneous. Do not dilute the mixture.
Pot life: Approximately 5–6 hours after mixing.

Application

Wooden Furniture, Counters, Stairs and Vertical Surfaces

Apply the mixed oil with a scrubby pad, foam brush, cloth, or a hand sander fitted with a white pad.
Alternatively, spread the oil with a spatula in manageable sections and complete each area within 30 minutes.
Depending on wood type and sanding, 1 oz (30 ml) of product can cover up to 18 ft² (1.7 m²). Apply in thin layers, as a little goes a long way.

Floors

Work in sections of 50–100 ft² (5-10 m²). Begin with the border areas using a scrubby pad.
Continue by applying the oil with a brush and polishing machine fitted with a red or white pad, or
spread the oil evenly with a spatula and then buff with a white pad.

Remove Excess

Allow the oil to react with the wood for 5–15 minutes.
Remove all excess oil thoroughly with a clean cloth or white pad.
The surface should feel dry to the touch—do not leave wet spots or oily residue.

Drying & Curing

The surface is suitable for light use after 24 hours.
Full cure is achieved in 5 days. Ensure proper ventilation throughout the drying process.
Cooler temperatures or higher humidity may extend drying times.

Cleaning

After 48 hours, the surface may be wiped lightly with a damp cloth if needed.
After 5 days, regular cleaning can be done with Natura Onecoat Wood Soap or Surface Cleaner.
Important Notes

CAUTION: Cloths that are soaked with oil may spontaneously combust. After usage, wash the cloths with water before disposal!

Surface Preparation

Ensure the wood surface is clean, dry, and free of dust, grease, wax, or other contaminants.

Sand bare wood to 180–220 grit. Vacuum thoroughly and remove any remaining sanding dust with a clean microfiber cloth.

For best results, apply to bare, unfinished wood.

Ready to Use

Natura Onecoat Hardwax Oil is a single-component, ready-to-use finish. No mixing or hardener is required.

Stir the product thoroughly before and during use. Do not dilute.

Application

Apply a small amount of Hardwax Oil using a white pad or spatula.

Spread the oil thinly and evenly, working it thoroughly into the wood grain. Work in manageable sections to ensure a consistent application.

Avoid over-application, a little goes a long way.

Remove Excess

Allow the oil to penetrate the wood for approximately 15–30 minutes.

Thoroughly remove all excess oil using a clean, lint-free cloth or white pad.

Buff the surface until it feels dry to the touch, with no wet spots, streaks, or oily residue remaining.

Proper removal of excess oil is essential for an even appearance and proper curing.

Drying & Curing

Allow the surface to dry with good ventilation.

The surface is suitable for light use after 24 hours.

Avoid water exposure and heavy use during the curing period.

Full cure is achieved in approximately 2 weeks. Cooler temperatures, limited airflow, or higher humidity may extend drying and curing times.

CAUTION: Oil-soaked cloths may spontaneously combust. After use, wash cloths with water and allow them to dry flat before disposal.

Shake the bottle well before use.
Apply a small amount of Maintenance Oil using a clean white pad or lint-free cloth.
Work in manageable sections, rubbing the oil evenly into the surface.
Let the oil sit for approximately 10 minutes.

CAUTION: Oil-soaked cloths may spontaneously combust. After use, wash cloths with water and allow them to dry flat before disposal.

Mix 1-2 part soap with 100 parts water in a bucket. Clean the surface using a mop or microfiber pad dipped in the soapy mixture, ensuring to wring it out so the surface is damp, not overly wet. Rinse the area with clean water, then wipe away any excess moisture with a dry, clean cloth. Allow the surface to dry completely for about 15 minutes.

Surface Cleaner is a versatile, pre-mixed spray cleaner derived from Natura Soap. Ideal for maintaining oiled surfaces, it’s perfect for spot cleaning smaller areas and removing stains on floors, tables, and countertops. It is ready to use formula does not need extra dilute.